Use this list to work out which Link Cable you need to use with your camera for time-lapse, panorama or using the product turntable. Please note that Link Cables only fire the shutter in these modes so aren't needed for use in Video Mode - in this case you'll need to start recording on your camera manually before starting your move in the App.
If you'd like to use your camera's internal time-lapse feature, you'll need to use Continuous Mode in the App, but you won't need a Link Cable. For more on this, watch our tutorial on shooting an internal time-lapse with motion control.
| Model | Interface Type | Link Cable |
| Z6 | MC-DC2 | 3N |
| Z7 | MC-DC2 | 3N |
| D7500 | MC-DC2 | 3N |
| D5600 | MC-DC2 | 3N |
| D3400 | No shutter port | IR |
| D500 | Ten-pin remote terminal | 1N |
| D5 | Ten-pin remote terminal | 1N |
| D7200 | MC-DC2 | 3N |
| D810A | Ten-pin remote terminal | 1N |
| D5500 | MC-DC2 | 3N |
| D750 | MC-DC2 | 3N |
| D810 | Ten-pin remote terminal | 1N |
| D850 | Ten-pin remote terminal | 1N |
| D4S | Ten-pin remote terminal | 1N |
| D3300 | MC-DC2 | 3N |
| Df | MC-DC2 | 3N |
| D5300 | MC-DC2 | 3N |
| D610 | MC-DC2 | 3N |
| D4 | Ten-pin remote terminal | 1N |
| D3X | Ten-pin remote terminal | 1N |
| D3S | Ten-pin remote terminal | 1N |
| D800 | Ten-pin remote terminal | 1N |
| D600 | MC-DC2 | 3N |
| D300S | Ten-pin remote terminal | 1N |
| D7100 | MC-DC2 | 3N |
| D7000 | No shutter port | IR |
| D90 | MC-DC2 | 3N |
| D5200 | MC-DC2 | 3N |
| D5100 | No shutter port | IR |
| D5000 | No shutter port | IR |
| D5500 | MC-DC2 | 3N |
| D5600 | MC-DC2 | 3N |
| D3200 | MC-DC2 | 3N |
| D3100 | MC-DC2 | 3N |
| D3000 | No shutter port | IR |
| COOLPIX P7100 | No shutter port | IR |
| COOLPIX P7800 | MC-DC2 | 3N |
| COOLPIX P7700 | MC-DC2 | 3N |
Comments
0 comments
Please sign in to leave a comment.